Download 5.1.1 firmware for Hugsun MXQ Pro

Posted in Jun 7, 2016 in Firmwares, TV Boxes, 3 comments

This firmware is for Hugsun MXQ Pro TV Box with AMLogic S905 CPU. 

Hugsun MXQ Pro

Download latest Android Lollipop 5.1.1 stock firmware for Hugsun MXQ Pro TV Box from here or here.

Firmware details
Archive name: hugsun_s905_mxq_20160527
Image: hugsun_s905_mxq_20160527.img
Archive file size: 631 MB
Platform: AMLogic S905


Caution Please do not update firmware unless you know what you are doing, you really want it or it is absolutely necessary. Firmware updates may occasionally have bad results, like bricking your device, temporarily or permanently. The firmware update process is done entirely at your own risk. Before attempting to update the firmware, back up your data.

Did this article help you? If so, please tell me in a comment what do you think about it.

Don’t miss any of our future video tutorials, follow us on Youtube. Like us on Facebook. Add us in your circles on Google+. Watch our photo albums on Flickr.

  1. 1 FlatText said:

    This firmware makes the box stuck on new MXQ Pro logo. Doesn’t boot into anything.

  2. 1 ben said:

    I managed to flash this successfully, however it is stuck on a ‘set-top box initialization’ screen, i have tried force closing, doesn’t work.
    Please release a decent working OS, a custom one if needs be, but more stable. I do not care for ‘airPin’ or any of the pre-installed netflix, kodi etc. I just want a stable OS that supports all video formats, and will work with Dolby HDMI pass-through for Dolby surround sound.
    Also, official Kodi does not work too well on these boxes, there is an audio sync issue that seems unfixable, I think this is down to no ability to change audio output source within Kodi, it stays as ‘android, audiotrack’.
    I have found the latest SPMC direct from their site runs best, it has better support for the Amlogic chips and more audio settings (audio output can be changed to IEC & RAW passthrough). The audio sync issue is not as pronounced either. It still needs improving a lot though. I have tried every firmware I can find for the MXQ Pro 4k P201. The most stable are below, but are still not very good, please work on the refresh rate in HDMI as I think this could also be the problem, which is obviously a firmware issue.
    Most stable I found: 1st, 905_MXQpro_aml_upgrade_package-20160530
    2nd, L-MXQPRO-KODI-0511

  3. 1 ben said:

    EDIT: after force reboot (CTRL + ALT + DELETE on keyboard mouse) it worked and finished initializing, however it is same OS, not improved and only thing seems to have changed is Kodi 16.1, but again audio sync issue, so not really any point putting Kodi on there, should have SPMC 16.3 installed!

    Please re-work the OS to be more stable and better looking!

china gadgets reviews