Download Android 5.0 stock firmware for Jumper EZpad 4SE Dual OS Tablet
This firmware is for Jumper EZpad 4SE Dual OS Tablet with Intel Z3735F as CPU. You can buy Jumper EZpad 4SE Dual OS Tablet from Gearbest for only $117 with free shipping. Hurry up, only 2 pieces left!
Download Android 5.0 stock firmware for Jumper EZpad 4SE Dual OS Tablet from here or here. This is for Dual OS system installation.
Firmware details
Archive: EZpad 4SE_I1061B3L1CA51_32_20161114_1605210
Model: Jumper EZpad 4SE Dual OS Tablet
Image file size: 624 MB
Platform: Intel Z3735F
Update file name: I1061B3L1CA51_32_20161114_1605210
Build number: anzhen4_mrd8_64-eng 5.0 LRX21V eng.liyanlai.20150313.095818 dev-keys
Caution: Please do not update firmware unless you know what you are doing, you really want it or it is absolutely necessary. Firmware updates may occasionally have bad results, like bricking your device, temporarily or permanently. The firmware update process is done entirely at your own risk. Before attempting to update the firmware, back up your data.
Great Work!
this is my question..
I bought on EBAY the following tablet
Jumper Ezpad 4SE Tablet PC Windows 10 + Android 5.1 Intel Bay Trail-Z3735F Quad Core 1.33GHz 10.6 inch IPS Screen 2GB RAM 32GB ROM Bluetooth 4.0 OTG 2.0MP Rear Camera Dual USB
I was able to use the tablet only three times
I turned on the tablet and I used Windows 10 to connect to internet via a wifi open connection and worked perfectly.
I changed Android operating system, and it seemed to work perfectly.
I went back to Windows 10.
I was prompted to activate online Windows 10 but this time not possible to connect to the same wifi network.
I ran Windows 10 troubleshooting.
I received the following error “Missing the winsock component”
I tried to remedy by performing a soft reset the control panel but did not work and the error remained the same
I tried to remedy by performing a hard reset via the control panel, but the process was interrupted for no apparent reason while the operating system was re-installing at 74%
No longer able to restart and I get the error in photos
Note i am an experienced user, I worked for about 10 years as a programmer and I own two Microsoft certifications.
I have not made any modding or operations prohibited by the Warranty
I ask:
“What is the problem?”
“How can I reinstall the Windows 10 operating system on my tablet?”
“How can I reinstall the operating system Android on my tablet”
“How i can install this firmware”
I notice the following differences with respect to this listing:
The OS is not Windows 10 64-bit, but the 32-bit version Home
There is no power supply but only the USB cable
I have the same problem.
The Jumper Tablet cannot start, both windows & android are corrupted.
I am trying to download android to a USB drive and boost from it.
Please advice
If it can run on android i am satisfy.
Please advice
hi do you know how to install android to ezpad 5se of jumper?
can you share to me please if you have any firmware and how to install?
i have jumper ezpad 5se running windows 10 its not dual boot but if i access the booting option there is an android but android did not install to the machine i wonder.