Download Android 7.1.2 firmware for TOUMEI C800 Mini Video Projector

Posted in Aug 1, 2018 in Firmwares, 6 comments

This firmware is for TOUMEI C800 Mini Video Projector with Rockchip RK3128 as CPU. You can buy it from Gearbest.com for a very good price with free shipping world wide.

TOUMEI C800

Download Android 7.1.2 firmware for TOUMEI C800 Mini Video Projector from here, here or here. Download Rockchip Driver Assistant v4.4 from here and download Rockchip Batch Tool v1.8 from here.

Firmware details
Archive: Toumei C800 series 7.1-20180613
Archive size: 926 MB
Platform: Rockchip RK3128 / RK312A
Image name: FOTA-P306-H3-TM-C800series-03-EN-7.1-20180613 / update.img
FW version: 7.1.02
Boot version: 2.40
Company: rockchip
Inside archive: firmware + Driver For Win10 (Win10_DriverAssitant_v4.4) + New Driver for Win 7 (NEW_DriverAssitant_v4.1.1) + FactoryTool_v1.51 + Upgrade Instruction

 

Firmware Upgrading method from Android 4.4.4 to Android 7.1.2
NOTE: This upgrade only work for A and B series, you can check it by the bar code at the bottom of the projector.
1. Download firmware and relevant tools for upgrading:
2. Install Windows driver.
For Windows7 install –> NEW-DriverAssitant-v4.1.1.zip
For Windows10 install –> NEW-DriverAssitant-v4.4..zip
The Mac system needs to find its own driver.
3. Open the factory upgrade tool and select the language.
4. Download update.img file to the computer. Click the “Firmware” button and open the file then click the “Run” button
5. Connect the projector to the power. Connect the projector to the computer with a two-headed USB cable.
6. Insert a cylinder with a diameter of 3mm into the headphone hole and press the “BOOT” button inside the headphone hole,Press the “POWER” button and the “BOOT” button for 3 seconds at the same time When the machine is off state. The computer identifies the projector and begins to automatically upgrade.
7. The first upgrade of android 4.4 will show that the upgrade failed,Use the wire to press the reset button on the back of the machine.
8. After the projector is turned off, repeat the step 6. The machine will complete the upgrade automatically. Unplug the USB cable when the machine is automatically turned on and appear on the main interface. Upgrade success!

Caution: Please do not update firmware unless you know what you are doing, you really want it or it is absolutely necessary. Firmware updates may occasionally have bad results, like bricking your device, temporarily or permanently. The firmware update process is done entirely at your own risk. Before attempting to update the firmware, back up your data.

Did this article help you? If so, please tell me in a comment what do you think about it.


  1. 1 Dango said:

    After following the instruction for updating the OS, the projector is stuck at SMART PROJECTOR logo screen. It will not load the new os.

  2. 1 avi said:

    Hi
    I need your help I have a tiny projector company BYNITEK MODEL MD322 and I want to make a firmware update to 7.1.2 current firmware 4.4.4 All my attempts failed to file that sent me corrupted Also the rest of the files to perform the operation are not normal How can you help me? Thanks AVI

  3. 1 MICHAEL T CAMPBELL said:

    I’ve read a ton of reviews that the update is causing the device to get stuck on Smart Projector screen; has then been fixed? What do people do if this happens?

    Thanks

  4. 1 noman naseer said:

    i have ExquizOn E05 which have a same specs like this projector. but when i upload firmware 4.4 to my projector boot and start android successfully but low power shutdown immediately coz its not showing otg power is connected and battery power is also showing 0% showing what should i do please advice tell me how to change charger file etc my original charger was bq25895.

  5. 1 imran said:

    i need the firmware of c800 KitKat 4.4 from where I get it

  6. 1 danyrolux said:


china gadgets reviews