Geekbox, a Versatile Open Source TV Box that you can DIY @ Geekbuying

Posted in Nov 20, 2015 in News, TV Boxes, no comment

Unlike Traditional TV box which turns the television into an intelligent platform like smart phones or tablet PCs, GeekBox will break this balance by not only fulfilling the aforementioned fundamental missions, but also opening an open-source project. GeekBox is not simply a piece of hardware, but a DIY carrier, which carries all kinds of ideas and dreams from geeks.


You can now pre-order Geekbox fron for only USD 109.99 with free shipping worlwide.

SUV-like Appearance
Outline of a SUV shell, with streamlined figure and ingenious design. The vent-equipped upper shell does not only for ventilation, but also highlights its SUV-like profile. 2 LEDs soldered on the main board will light up, once being powered. Considering its durability, we have equipped it with a anti-slippery lower shell.

Compact & Portable
Light as feather, Geekbox is portable enough for you to jam in the pocket and carry on the go.
Delicate as diamond, Geekbox is coated by a streamlined outline and exquisite angular shell.

Android 5.1 & Ubuntu Dual Boot(can install Light Biz OS)
Pre-installed Android & Ubuntu Dual OS, a hot key switch Android & Ubuntu.
You can also install Android–based Light Biz OS from Rockchip

High Performance Octa Core CPU
The RK3368 is an Octa Core 64bit, ARM Cortex-A53 processor with PowerVR G6110 graphics chip, 28nm processing design, Support OPENGL ES 3.1. RK3368 with super video capabilities, 4K×2K, H.265 and HDMI 2.0@60Hz output support.

2GB +16GB Samsung eMMC 5.0
Samsung eMMC 5.0 is the world’s fastest embedded memory, featuring an interface speed of 400MB/s. In particular boast random read and write speed of 7,000 IOPS (inputs/outputs per second) and sequential read and write speed of 250MB/s and 90MB/s respectively.

AP6354 WiFi Module
AP6354 is a 2×2 WiFi + Bluetooth4.1 Module, the wireless module complies with IEEE 802.11 a/b/g/n/ac 2×2 MIMO standards, with a speed of 867Mbps.

MXM-III (MXM3) Interface
There is unlimited potential with MXM3 interface. You can connect GeekBox to GeekBox Landingship via MXM3 interface to turn the former into a development board. And connect any compatible device to GeekBox MXM3 interface to turn the former into a smart one in the future. Such as a display(digital photo frames), router(upload and download files without internet), projector(smart projector), etc.

A reset button for the ease of system resetting, an update button for the ease of system update

Infrared Remote Control
Control the box wherever you are in the room with IR remote

Visible interface: 2*USB, 1*Micro USB, 1*HDMI 2.0, 1*DC In, 1*RJ45 1000M LAN, 1*TF Card Slot
Invisible interface: 1*Fan connector, 1*RTC Battery connector, 1*Serial Port, 1*TP interface, 1*Display interface

Control Geekbox with TV Remote(XIAOMI TV Remote,etc ) via HDMI CEC

Preinstall KODI, can support Hardware decoding, 4K*2K UHD video playback, support 4K@60fps

Package Content
1 x Geekbox main board
1 x Housing
1 x IR Remote control
1 x HDMI cable
2 x Antennas
1 x Charging cable
1 x Heat Sink
1 x Power adapter
1 x User manual

Geekbox Geekbox


About Geekbuying was built to offer the coolest gadgets to the whole world at incredible low prices. And we have realized that online shopping has been very popular world widely but all the same story, sometimes kind of bored, lots of funs in real shopping are missing, so we’d like to add some new fun in online shopping to make the experience better. At GeekBuying, you will get fun in shopping. No matter you are a geek or not, you are sure to enjoy shopping at GeekBuying. We work passionately to exceed your expectations every time. Once You Buy, You Know.

Did this article help you? If so, please tell me in a comment what do you think about it.

Don’t miss any of our future video tutorials, follow us on Youtube. Like us on Facebook. Add us in your circles on Google+. Watch our photo albums on Flickr. Subscribe now to our newsletter.

china gadgets reviews