This firmware is for Xnano X5 TV Box with Realtek RTD1295 as CPU. BTW, you can now buy Xnano X5 TV Box from Gearbest for only 78.13 with free shipping.
Download Android 6.0 stock firmware for Xnano X5 TV Box 1GB + 8GB from here, here or here. Download Android 6.0 stock firmware for Xnano X5 TV Box 2GB + 16GB from here, here or here.
Firmware details
Archive: install(1+8GB) / install(2+16GB)
Model: Xnano X5 TV Box 1GB + 8GB / Xnano X5 TV Box 2GB + 16GB
Image file size: 647 MB / 647 MB
Platform: Realtek RTD1295
Update file name: install(1+8GB).img / install(2+16GB).img
Update Process
– Download the firmware and rename the image file to install.img
– Copy the file ‘install.img’ within a USB memory
– Turn off TV Box and connect the USB memory
– Press reset button and turn on the TV Box
– The update information appears on display
– The update process takes about 3 minutes
– The TV Box will automatically restart to complete the process.
Caution: Please do not update firmware unless you know what you are doing, you really want it or it is absolutely necessary. Firmware updates may occasionally have bad results, like bricking your device, temporarily or permanently. The firmware update process is done entirely at your own risk. Before attempting to update the firmware, back up your data.
Did this article help you? If so, please tell me in a comment what do you think about it.
Don’t miss any of our future video tutorials, follow us on Youtube. Like us on Facebook. Add us in your circles on Google+. Watch our photo albums on Flickr. Subscribe now to our newsletter. Biggest firmware download center.
Here is some wrong informations. Image file size is not 647 MB but 1.4 GB and xnano X5 doesn’t have reset button unless you think power off button.
I do all steps of update process like you suggest but my xnano didn’t recognize img file at start. I also have enabled “use unknown sources” but file not starts at xnano starts.
I see install file with file manager but when I select “open with package installer” it says “There was a problem parsing the package”.
Have you any solution about it?
Hi,
like described, load the update and rename it. (1.4 GB)
copy on usb stick.
use usb 3.0 port to connect.
shut complete down the box.
use a thooth-pik to push the button in the av-out port and hold it pushed.
push on the remote control the power on button and hold them too.
it was needed to hold both buttons a bit longer time.
when the display comes with 00:00 you can release
the buttons and on TV you get showed updating process.
thats it then. after restart you have new android 7.x