Since the aircraft is powered by two 1S batteries in series, and the aircraft supports 1-2S power supply, please be sure to drop when the single cell voltage is lower than 2.9v or the buzzer starts to alarm, so as to avoid over-discharge.
Happymodel Mobula7 Indoor Brushless Whoop RC Drone Features
– Crazybee F3 PRO version of the flight controller support 1-2S lithium battery
– 2S indoor Whoop RC drone with stronger power and longer flight time
– Support BetaFlight tuning, multiple flight modes
– Integrated injection molding Tiny Whoop structure
– Frsky and Flysky versions of highly integrated motherboard integrated OSD, Dshot ESC, 2.4G SPI receiver, galvanometer
– DSM2/DSMX version flight control integrated OSD, Dshot four-in-one ESC, 2.4G serial receiver, galvanometer
– Frsky EU-LBT version external Frsky XM+ receiver Supports EU-LBT version remote control
– Integrate Betaflight OSD function, keep abreast of flight voltage, receiver signal, fly more calmly
– VTX comes with Smartaudio function, which can adjust the flight control parameters through the OSD to adjust the flight control PID and adjust the VTX frequency parameters.
– Completely assembled and commissioned, the hands and the remote control are flying
– Receiver optional Frsky NON-EU version (D8/D16 switchable SPI receiver), Flysky version (AFHDS/AFHDS-2A switchable), DSM2/DSMX version, Frsky EU-LBT version (external XM+ receiver)
– Camera tilt angle is adjustable
– Integrated buzzer
1 x WHOOP 75mm Frame, 1 x Crazybee F3 PRO Flight Controller with Integrated ESC OSD Receiver Galvanometer, 4 x SE0802 KV16000 Brushless Motor, 8 x 40mm CW / CCW Propeller, 1 x 5.8G 40CH 25mW Transmitter with 700TVL 1/4 CMOS Camera, 4 x PH2.0 30C / 60C Lithium-ion Battery (3.8V 300mAh or 4.35V 250mAh Sent Randomly), 1 x Battery Holder (Random Color), 1 x USB Charger, 1 x Stripper, 1 x Screwdriver