The new firmware FW1.1 for FiiO BTA30 is now available to download.
The following changes and improvements have been made in the new firmware:
1. Fixed the issue where the reconnection may fail or cause a system freeze in TX mode;
2. Fixed the issue where a pop sound would occur when starting to play in RX/DAC mode.
3. Fixed the sound dropping out issue when connected to the computer via Bluetooth in RX mode;
4. Fixed the sound dropping out issue when input via SDPIF in DAC mode;
5. Miscellaneous bug fixes.
How to upgrade the BTA30
The BTA30 supports the DFU upgrade. Follow the 3 steps below to upgrade it.
1. Download the firmware upgrade package and unzip it.
2. Enter DFU upgrade mode: Connect it to a computer with a data cable. Turn it on and switch it to the RX mode. Long press the PAIR button for 3s to enter pair mode. (The indicator in Pair button will flash green and red alternately). And then hold both the POWER and PAIR button for about 5s until the light goes out. It will enter DFU mode.
3. Execute the “FiiOBluetoothDfu” file of the installation package. Click “Start to Upgrade”.
Notices
– Unplug and re-plug the USB cable to quit the DFU mode.
– If it fails to upgrade after clicking “Start to Upgrade”, please try to re-enter the DFU mode.
To download BTA30 firmware just click here.
Did this article help you? If so, please tell me in a comment what do you think about it.
Don’t miss any of our future video tutorials, follow us on Youtube. Like us on Facebook. Watch our photo albums on Flickr. Subscribe now to our newsletter.
