Download Android 7.1 stock firmware for CSA95 TV Stick
This firmware is for CSA95 TV Stick with Amlogic S912 as CPU. BTW, you can now buy CSA95 TV Stick from Gearbest.com for only $68.34 with free shipping world wide.
Download Android 7.1 stock firmware for CSA95 TV Stick from here and here. Download Amlogic USB Burning Tool v2.0.8 from here or download Amlogic Burn_Card_Maker v2.0.2 from here.
Firmware details
Archive: aml_7.1_s912_q9377-csa95-100m_KDMC__mac-20170927
Model: CSA95 TV Stick
Image file size: 676 MB
Platform: Amlogic S912
Image: aml_7.1_s912_q9377-csa95-100m_KDMC__mac-20170927.img
Caution: Please do not update firmware unless you know what you are doing, you really want it or it is absolutely necessary. Firmware updates may occasionally have bad results, like bricking your device, temporarily or permanently. The firmware update process is done entirely at your own risk. Before attempting to update the firmware, back up your data.
Did this article help you? If so, please tell me in a comment what do you think about it.
Advertisements
Hello.
Thank you very much for firmware aml_7.1_s912_q9377-csa95-100m_KDMC__mac-20170927. Device works perfectly but I cannot set up any wallpaper on the device and another launchers are (for a example – Nova launcher) crashing. Help me to resolve this problem, please.
This update is great, I noticed that the network card is 100mb Fast Ethernet and not Gigabit 1000mb as the sites advertise, including in this photo of this post also announces this, Android that comes with this update is 7.1.2 (64bits), could launch an update with Android 7.1.2 or 8.0 (Oreo) 64bit and lan 1000mb Gigabit??
My CSA95 is bricked, I already tried to install this firmware 7.1.2 and the other firmware 6.0 by USB BURNING TOOL that has here in the site always appears error in 7% UBOOT / disk initialize / send command / error result and never completes the transfer I already tried to install by SD card method using SD Card Maker but my device does not show image in HDMI, and it does not enter the Upgrading mode, even if I connect the device with the inserted card and pressing the reset button, I am with the bricked device and does not have a correct firmware that can be transferred by the USB Burning Tool to recover my device unfortunately.