Download Amlogic USB Burning Tool v2.0.4.3
You can use Amlogic USB Burning Tool to flash firmwares from a Windows PC to Android devices powered by Amlogic processors.
Download Amlogic USB Burning Tool v2.0.4.3 from here, here or from here. Download previous version from here.
How to use Amlogic USB Burning Tool
1. Download USB_Burning_Tool_v2.0.4.3_user.rar.
2. Extract the archive and run setup_v2.0.4.3.exe file to install the tool.
3. Start the USB_Burning_Tool.
4. Click on File->Import image and select your specific .img firmware for your Amlogic device.
5. Make sure that your Amlogic device is powered off, with the USB OTG port connected to your PC. Use a toothpick to press the recovery button, and power the device. The USB burning tool should automatically detect your device.
6. Now click on the ‘Start’ button button to proceed with the firmware update which should last several minutes.
Follow this video tutorial for more help.
Did this article help you? If so, please tell me in a comment what do you think about it.
Don’t miss any of our future video tutorials, follow us on Youtube. Like us on Facebook. Add us in your circles on Google+. Watch our photo albums on Flickr. Subscribe now to our newsletter.
What kind of otg cable i need, because this TVBOX M8S have only usb type A female
I bought the device S805 plus MK809IV but ram size “0” seemed to be. I’ve met with vendors. Install from SD card sent to me she said ROM. I’ve installed plug. tool does not open now. not lit at all.It does not accept the new software. I’m trying to take software from the computer (USB burning tool) gives an error. ([0x10105002] in Romco / Initialize DDR / initialize the status Reader / USB Controller Setup Error) Can you please help me?
Hi
keep getting error at 8-10 sec
0x10105002 romcode/initalize ddr/read initialize status/usb control setup error
what does this mean i have tried a couple of laptops
i get the same error at 2% ,i got windows 10 and no problem connect the device …
I have a m8s I used the usb tool with no luck I’m getting low power error tried reset button and tried shorting the nano pins my box is bricked it will not power on at all so you have a video to fix that Thanks
Have any suggestions for the MXQ Pro Plus? There’s no power button, no reset button, (AV or otherwise) and who has a dubble male ended USB cable lying around?
Amlogic USB Burnig Tool Parse Burning iamge fail,how do I fix it?
I have the same error with the USB Buring tool does not load image file due to Parse image failed.
Bad Sequence or Order of instruction! Should no 5 stage be performed before no $?
I have the same error with the USB Buring tool startup
pls if u can help me to repaire my device
A95x max