Unboxing Dikale DKL-05A 3D Printing Pen
You can now buy Dikale DKL-05A 3D Printing Pens from Amazon.com, Amazon.co.uk or Amazon.de.
A 3D pen mainly uses plastic instead of ink. You insert the plastic filament and once it’s inside the pen, it gets hot from the heating technology inside. The heat is intense enough to melt the plastic, and turn it into a liquid. After that’s done, you can start using the pen to write on anything you want. The good thing about 3D pens is they work on almost all surfaces.
– AMAZON EXCLUSIVE. Dikale 3D Pen with the unique exterior design – A cute cat, exquisite gift wrap, the best Birthday Christmas gifts for kids. Not available anywhere else in the world.
– CHILD-SAFE 3D PEN. It will cut the power off automatically after 10 minutes of no activation during sleep mode, completely safe for kids.
– 3D ART MADE EASY FOR KIDS. OLED displays shows the temperature and speed, which makes you take control of temperature, speed, filament when in application. “One Button” control, plastic hardens rapidly allowing kids easy to use.
– FREE & SAFE PLA FILAMENT, STENCILS. It comes with 2*7.5meters trial filaments and 20 different pattern 3d drawing stencils for beginners. Compared to ABS, the PLA Filament of melting is non-toxic, odorless and cause no heat, which is safer than ABS, tend to be a widely-used filaments.
Brand Name: Dikale
Product Model: DKL-05A
Suitable Filament: PLA / ABS
Material diameter: 1.75mm
Nozzle Size: 0.6mm
Pen Size: 186mm (length), 36.6mm (diameter)
Pen Weight: 72g
Voltage: 5V-2A
Power: 10W
Interface type: USB
Operating Temperature: 170℃-210℃
Product Certification: CE ROHS FCCr
Product code: X000QCLFFJ / DKL-UK-H05A-WHITE / 20170828 New
Colors: White / Pearl White / Blue / Pink / Gray / Yellow
Switching Adapter: model KCHA050200EUU, Input: 100-240V 50-60Hz 0.6A Max Output: 5.0V 2.0A
Operation Guide
1. Cut the top of the material to make the cuts be flat.
2. Connect the power supply, then the screen shows DIKALE.
3. Press “<” button once to activate. Press “M” to select filament mode, then press “<” to confirm.
4. Press “M” to select speed.
5. Put filament into the pen, gently push the other end of the filament until it goes through the gear. Press “<” once to star loading filament.
6. You can pause your drawing by pressing “<” once.
7. After using, press the “<” once to stop loading, press “>” for 3 seconds to start unloading automatically.
Important Notes
1. Applicable age: 5 years old and above
2. DO NOT touch the nib during using
3. Keep the filament end be trim before loading
4. Suggest to unload the filament after finish drawing
5. Please do not use it more than 1 hour or let it stops for 10 minutes, so as to avoid damage to the pen
6. PLEASE accompanied by your kids to use this 3D pen. Parent-child activity can enhance the relationship between parents and children.
7. More information please refer to our manual
Package Content
1 x Dikale DKL-05A 3D Printing Pen
1 x Power Adapter
1 x USB Cable
1 x Instruction Manual (English & German)
20 x Different Pattern Stencils
1 x Pen Holder
1 x PVC Drawing Board
Did this article help you? If so, please tell me in a comment what do you think about it.
Don’t miss any of our future video tutorials, follow us on Youtube. Like us on Facebook. Add us in your circles on Google+. Watch our photo albums on Flickr. Subscribe now to our newsletter.